[. . . ] 1 NOTE: Depending on body size, adjust control shaft to working height after mounting the power cut. [. . . ] 7 6 5 4 2 8 1 3 F Mounting the water tank Unscrew the star handle (1) and remove control shaft (2). mount tank holder (3) and control shaft (2) with star handle (see picture). mount tank holder (3) and control shaft (2) with star handle (see picture). 1 4 2 NOTE: Adjust the tank holder (3) so that the water tank is flush with the guide trolley when working. NOTE: Before filling the water tank, detach the hose (6) from the water set coupling and take the water tank out of the tank holder, unscrew cap (5) and fill with clean water. Do not allow dirt to get into the tank, as it could block the sprinkler nozzles. 3 6 G 7 Mounting the power cut 2 Place the guide trolley with the control shaft onto the floor. mount tank holder (3) and control shaft (2) with star handle (see picture). [. . . ] Loose screws (1) of the axle fixing and push wheel axle right over to the left. [. . . ]